4 Points--1.2 inch Durable Screw Threading Machine Manual Threading Machine Water Pipe hinge twist plate die threading kit
Name: Manual threading machine
Packing weight: 6KG
Packing size: 40*21*9cm
Size: 4 points/6 points/1 inch/1.2 inches
Name: Manual threading machine
Packing weight: 6KG
Packing size: 40*21*9
Size: 4 dots/6 dots/1\'\'/1.2\'\'
Operation steps: the pipe is fixed on the bracket, and a certain length is reserved at the front end for threading. The end-to-size matching dental die head is installed on the ratchet handle, and the threading machine is connected to the pipe. Start threading: Push the die head with the left hand to rotate clockwise (right-hand thread). After the die has entered the pipe for a circle, you can loosen your left hand and lean against the grain on the die to feed itself. You can add some cutting oil to the magnet. Stop threading when the edge of the pipe is flush with the end of the wrench. At this time, adjust the ratchet handle to reverse and slowly withdraw the dental die head from the pipe.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.