4 PCS BME280 3.3V Atmospheric Pressure Sensor Module GYBME2803.3 For Pi 4 PCS BME280 3.3V Atmospheric Pressure Sensor Module GYBME2803.3 For PiFast U.S. ShippingTracked Delivery30-Day Easy ReturnsSafe CheckoutPayment Options
We accept PayPal, major credit cards, and all official payment methods supported by . Please ensure your payment details are up-to-date.
Key Features Highlights
- The BME280 is the next-generation of sensors, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI.
- BME280 Pressure, Temperature, and Humidity Sensor: High precision and resolution, our temperature probe sensor offers highly accurate temperature, pressure, and humidity measurements with I2C and SPI Interfacing.
- BME280 Sensor: Supply Voltage: 1.71 V to 3.6 V; Interface: I2C (up to 3.4MHz),SPI (up to 10 MHz); Pressure: 300-1100 hPa;Temperature: -40 to +85°C ; Humidity: 0-100%; Humidity Response Time: 1s; Current Consumption:~3.6 μA.
- Pre-soldered BME280 3.3V: Solderless! Pins already attached. Ready to plug in and go.
- BME280 3.3v sensor module compatible with Raspberry Pi, and other Microcontrollers. It is used for weather monitoring, indoor climate control, and industrial process control.The package included 4pcs temperature humidity sensor module.
About the Product OverviewBME280 is a Temperature Humidity Pressure Sensor Module.
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
Even better, this product is ready to be plugged in since it already has soldered pins. Saving time and avoiding danger.
Specifications:
Interface: I2C and SPI
Supply Voltage: 3.3V
Measurements: Temperature, Pressure, Humidity. Pressure can be converted to altitude.
Compatibility: All Raspberry Pi and any microcontroller with I2C or SPI capabilities.
Soldering: Comes Pre-Soldered.
Temperature Range: -40 - 85 °C
Pressure Range: 300 - 1100 hPa
Humidity Range: 0 - 100 %
Humidity Response Time: 1 s
Current Consumption:~3.6 μA
Pins:
VCC: This pin is used for Supply Voltage.
GND: This pin is used for ground.
SCL: This pin is used for the clock pulse for I2C communication.
SDA: This pin is used for transferring data through I2C communication.
CSB: This pin can be used to allow multiple devices to share the same I2C bus.
SDO: This pin can be used to select the device\'s I2C address when multiple BME280 sensors are connected to the same I2C bus.
Package Included: 4pcs BME280 3.3V Atmospheric Pressure Sensor Module01Delivery Info
Prompt and secure shipping across the 48 contiguous United States with tracking included. Shipped strictly to your verified address.
02Return Policy
Returns are accepted within 30 days of delivery if you are not completely satisfied. Items must be returned in original condition and packaging.
03Your response
We appreciate your response! If you are happy with your purchase, please consider leaving a positive review.
04Contact Us
If you have any queries or require further assistance, please contact us anytime via messages.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.