|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
3D printed BT60-RS model rocket kit.
$24.99

ShelTech LLC BT60-RS model rocket STRATUS has gone through several changes over its existence with the BT60-RS being the current and most advanced 3D printed model rocket to date from ShelTech. The BT60-RS is a direct evolution of our most popular rocket kits, The BT60-X and BT60-R. Starting off with the BT60-X's already strong and ridged frame, The BT60-R's thicker and longer fin-fillets, The BT60-RS is another step in the evolution with a larger fin radius helping with stability at lower launch speeds while still being swept enough to allow high velocity flights.The fins of the BT60-RS are further out from the body tube while also traveling further up the body of the fin-can compared to the BT60-X or BT60-R.STRATUS BT60-RS was designed to work with the ESTES BT60 cardboard body tubes. SOLD printed component SPECS: Nose-Cone height =187mm / 7.3inNose-Cone outer diameter = 42mm / 1.6in inner diameter = 40.5mm / height = 171mm / 6.7inFin-Can width = fin tip to fin tip = 147mm / 5.7in Fin-Can utilizes a threaded locking motor retainer ring to prevent the motor from ejectingitself outof the rear of the rocket during the parachute ejection sold separately.Smallerdiameter/Shorter length motors will require a reducer for proper fitment. You will receiveone individual reducer sleave with your order!We suggest F series motors/29mmX114mm when not using the Fin-can, Nosecone, Motor reducer sleave, Motor locking ring. PLA(plastic or polylactic acid is a vegetable based, NON_TOXIC plasticmaterial, which commonly uses cornstarch as a rawmaterial.PLAis a thermoplastic polymer consisting of renewable rawmaterials.PLA is a user-friendly thermoplastic witha higher strength and stiffnessthan both ABS and model rocketry Nosecone and Fin-kit canbe used with ANY model rocket project/Body-tube that requires the above said specifications OR use the Estes BT60 Cardboardbody tubes. The BT60-RS kit comes with a Motor reducer sleave to allowflights on smaller D/24mm motors and not just the larger 29mm motors. Sanding and painting are required for a custom look/finish. MANY differentmodel glues and paints can be used in the construction of this model kit. Actual colors MAY VARY (dark gray/light gray) depending on filament availability. Quality does not change. and PRINTED in !FREESHIPPINGtoALL STATES! ! Rememberto always fly in a safe and designated area with a friend! ! WEARE NOTresponsiblefor ANYnegligent useof our rockets/Kitcomponents!Thank you for checking out,ShelTech LLC!

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|