3.7-12V Wireless Remote Control Switch Mini Small PCB 433mhz RF...

3.7-12V Wireless Remote Control Switch Mini Small PCB 433mhz RF Transmitter,3V -12V Battery Power Circuit Micro Controller for DIY
Product Details

• it is a small size and easy installation. high sensitivity, with flexible control ，five working model for choose,It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
• easy to use : We have made transmitter and receiver working together and test it before ship it,when you get it don\'t need to do anything ,just install it.
• the RF remote control adopts RF technology, stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 50 meters with no obstacle.
• it is mainly used in swtich, lamps, relays, remote controller, circuit boards,trumpet, power switch,home wireless control and security industry and battery powered on/off for small devices, etc. and other fields.

This product is an ultra-small mini remote switch. This is a safe widely used and flexible remote relay.Receiver parameters :Model number: NO1Jfrequency: 433MhzWorking Voltage: DC3.5V-DC12VWide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12VMax Load: 1A (have better Load less than 700ma)Quiescent Current: 5maRelay Working Current: 30maSize: 25*11*8mmWorking Mode: Momentary. Toggle .Latched ,Delay time 10S can change working model by yourself.(Notice: we send Momentary mode default .Encoding Type: Learning point to add extra transmitterNormally Open Port (NO) Common Port (COM) Normally Close Port (NC) Input DC3.5V-DC12V Output 0V Switching ValueMomentary---Press and hold relay On; Release relay Off.(one channel switch need one button remote)Toggle----Press relay On; Press same button again relay Off .(one channel switch need one button remote)Latched----Press relay On; Press other button relay Off . ( one channel switch need 2 buttons remote )Delay time : Press remote control button, the corresponding relay actuates and keeps working until the time out.We\'ve paired it up, so just wire it up and use it when you get it.Clearing Code:Connect the Learning Dot and hold on . Until the receiver Led indicator flash for 6 times, it mean Clearing code successfullyRemote control parameters:frequency: 433MhzWorking current: ≤12mAWorking Voltage：3.7v -- 9vTransmission Distance: 10-50 MetersPackage Include:1 x Receiver(without cover)1x Transmitter