2Pcs 12V Latching Relay Module
- Latching Relay:Compatible with for Variety of Small Current Control for Electrical Appliances Electronic Equipment Lamps etc
- Size:50*25.5*19mm;Connection line:300mm
- Volts:12V
- Load range:250V 10A AC;30V 10A DC Avoid high power (around 2000W)
- Commodities include:2Pcs Latching Relay;2Pcs Connection Line;1Pcs Screwdriver
12V latching relay module
Parameters:
Power supply voltage: 12V
Power supply current: greater than 100mA
Load: 250V 10A (AC) or 30V 10A (DC) avoid high power (about 2000W)
Lifespan: 1 million times
Press the trigger button, the relay latches, press it again, the relay disconnects, and can also be externally triggered and low-level triggered
Suitable for small current control of household appliances, various household lamps, factory equipment and various high-voltage and high-power products
Features:
1. Using single-chip microcomputer control, stable and reliable performance, strong anti-interference, no error triggering, performance far exceeds CD4013
2. The high-power voltage regulator provides sufficient and stable voltage, and is equipped with sufficient heat dissipation holes to ensure that the product works stably and reliably for a long time
3 With anti-reverse protection diode, short-term reverse power supply will damage the product
4. Using relay to control the load, it can withstand loads below 250V 10A (AC) and 30V 10A (DC)
5. Equipped with a touch switch as a product test, directly test the stability of the product
6. The trigger can also be an external trigger switch, the product is equipped with wiring terminals and leads, which is more convenient to use
7. The trigger can also be triggered by other sensor modules, as long as it is a low-level trigger, it is effective, and the function is more expandable
Instructions for use:
1. According to the wiring diagram, first connect the DC power supply. The power supply cannot be reversed. Although there is a protection circuit, it cannot be reversed for a long time. During installation, the board can be fixed on an edge object according to the actual situation.
2. Connect the wires and connect the 5-28V power supply. After power on, the red LED light is on, indicating that it has been powered on normally. Press the test button, the relay is attracted and locked (hear \"beep\"), and the green LED light is on; press the relay again to disconnect and hear (\"beep\"), and the green LED light is off.
3. The trigger can also be externally connected to a momentary switch. This module is equipped with wiring terminals and leads, and can be directly connected to a momentary switch for use.
4. The trigger can also be triggered by other sensor modules. As long as it is a low-level trigger, it is effective, and there is more room for expansion.
5. The wiring should not be too thin to ensure that the wire can withstand the corresponding current.
6. This module uses DC-DC voltage regulation, and a slight heating is normal. It is normal for the relay to have normal heating after working for a long time.
7. The load power must leave a certain margin for the relay load. Avoid high power (about 2000W) and long-term working environment, which will have a certain impact on the product life
Commodities include:2Pcs Latching Relay;2Pcs Connection Line;1Pcs Screwdriver
Shipping
- We ship within Three business days of payment, usually sooner.
- We use a selection of shipping services such as UPS, FedEx, USPS etc.
- We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
- Local pickups and combined shipping options are not provided at this time.
Return
- You can return a product for up to 30 days from the date you purchased it.
- Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
response
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via . We usually respond within 24 hours on weekdays.
Please visit our store to check out other items for sale!
Thank you for shopping at our store.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.