Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

220V 1.7KW Rocker Arm Curved Edge Sealing Banding Trimming Integrated Machine

220V 1.7KW Rocker Arm Curved Edge Sealing Banding Trimming Integrated Machine
$3,200.40

Buy Now

220V Rocker Arm/Foldable Arm Curved Edge Trimming Machine

Product Overview The rocker arm curved edge trimming machine is a special device for edge trimming of boards in different shapes. The functions of edge trimming, automatic glue removal and dust absorption can be fulfilled on one machine, the operating difficulty and complexity are greatly reduced, and the edge sealing performance, the attractiveness and the durability of boards can be well improved. The machine can be widely applied to the industries of cabinet manufacturing, wooden door production, home customization and so on. Attention 1. The machine must be reliably grounded. 2. The machine needs to be connected with an air compressor which needs to be prepared by the customer. 3. When any abnormal situation occurs in the working process, please press the emergency stop switch immediately. 4. Non-professionals are prohibited from disassembling and repairing the machine. 5. Before disassembling and replacing the machine, first turn off the power and then wear protective tools. 6. When inspecting the circuit, be sure to completely disconnect the power supply, otherwise there is still electricity in the circuit! Product Parameters Voltage 220V 50Hz Single-phase Total power 1.7KW Air pressure 0.6-0.8Mpa Edge band thickness 0.4-3mm Operating height <14mm, one-sided trimming; 14-70mm, double-sided trimming (influenced by trimmer) Trimming motor 220V 800W 2400r/min Working speed 0-23.9cm/s Dust suction pipe diameter 150mm Air volume 9800m3/h Edge band materials PVC, veneer, melamine, plastic, etc. Applicable boards plywood boards, acrylic boards, chipboards, block boards, density boards, etc. Product Features 1. Suction Disc
2. Trimming Motor
3. Adjusting Handle
4. Dust Suction Pipe
5. Profiling Motor
6. Emergency Switch
7. Motor Governor
8. Rotary Switches
9. Foot Pedals
 

Foldable Arm


The total length of the foldable arm is 175cm. Along with the flexible movement of the foldable arm, the board on the suction disc can be pushed to be subjected to edge trimming operation. The foldable arm can be folded and unfolded freely and flexibly in the process of the edge trimming operation, curved edge trimming is flexible and efficient, time and labor are greatly reduced, and the practicability is greatly improved.
 

 

Suction Disc


The suction disc with the diameter of 20cm has the high suction so that the board can be firmly sucked onto the suction disc and prevented from being suspended in the air. The load capacity of the suction disc is smaller than or equal to 50kg. The suction disc is independently controlled by the corresponding foot pedal, control is easy and convenient, two hands of the user are liberated, and the operating difficulty is greatly reduced.
 

 

Small Workpiece Platform


The trimming machine is equipped with a small workpiece platform, boards with different shapes and sizes can be easily processed and trimmed, and the trimming machine can have higher adaptability. The small workpiece platform can cooperate with the suction disc to complete edge trimming of various boards. The worker can easily push the board to be trimmed, so that the labor intensity is greatly reduced.
 

Photoelectric Inductor


The photoelectric device is designed for board edge trimming and can automatically sense the board. Rotation stops if the photoelectric inductor does not sense the board after 5 seconds. The machine has the high precision and induction sensitivity, and edge trimming operation is greatly facilitated.
 

 

Trimming Part


Edge trimming cutters can rotate synchronously to remove the unnecessary edge banding strips on the upper side and the lower side. Glue removing liquid is sprayed to the two sides to prevent the hot melt glue from adhering to the surface of the board. The excessive edge strips and glue lines are scraped away after edge trimming is completed. The thickness of the board to be trimmed is free of adjustment, and the trimming part can quickly adapt to different board thicknesses.
 

 

Dust Suction Part


The trimming machine is equipped with a thick brush and a thickened dust suction pipe with the diameter of 150mm. Chips can be sucked into the dust collector quickly and efficiently so that dust and chips can be effectively prevented from accumulating, and the cleanliness of the board and the machine can be well ensured. The dust collector needs to be turned on before edge trimming.
 

Profiling Power Wheel


The profiling flour wheel can drive the board to rotate according to the speed of the profiling wheel in the edge trimming process, so that the edge trimming operation is smooth and easy, the trimmed board is attractive and smooth, no burrs exist, and the quality and the appearance are greatly improved.
 

 

PTFE Air Columns


The PTFE air columns can automatically suck air to fix the board stably, the board can be effectively prevented from being scratched, and the good surface effect of the board can be well guaranteed. The air columns are smooth in surface, low in friction coefficient, excellent in insulation and long in service life, can effectively reduce the wear of the board and ensure the high quality of the board.
 

 

Foot Pedals


The two foot pedals control the suction disc and edge trimming operation correspondingly. The suction disc can work and stop by operating the suction disc foot pedal, and the edge trimming operation can be conducted by operating the edge banding foot pedal. Two hands of the user are liberated, the functions are clear and accurate, the operating complexity and difficulty are greatly reduced, and the user experience is good.
 

Installation Method The curved edge trimming machine is installed according to the following steps. 1. Connect the air source (Arrow 1). 2. Connect the power supply and the ground line (Arrow 2). 3. Connect the dust suction pipe (Arrow 3). 4. Rotate the emergency switch (Arrow 4) and turn on the rotary switch (Arrow 5). 5. Adjust the numerical value according to the board thickness (Arrow 6). 6. Conduct fine adjustment according to the thickness of the edge banding strip (Arrow 7). 7. Press the foot pedal (Arrow 8) so the suction disc can suck the board. Press the foot pedal (Arrow 9) so the edge trimming part can be opened, and the board can be put for edge trimming. 8. Supply the glue removing liquid. Application The rocker arm curved edge trimming machine can be used for processing various boards, such as plywood boards, acrylic boards, chipboards, block boards and density boards, can remove the unnecessary edge banding strips such as PVC strips, plastic strips and melamine strips, can be widely applied to woodworking plants and workshops and has a good edge trimming effect. Product Display Item Number (154063):

1 x Rocker Arm/Foldable Arm Curved Edge Trimming Machine 220V

Shipping & Handling Details Default Shipping Cost or FreeShipping Information:

▲Default shipping cost or free shipping service is only for the lower 48 UnitedStates by UPS Ground or USPS. Other areas or needs other shipping ways,please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii,PO Boxes, APO/FPO addresses or other countries/areas,thereWILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Anycosts incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time:

Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.

Sales tax /Customs duties:

Anysales taxes or Customs duties are not included. If came out, they mustbe undertaken by the buyer. Sales Tax of 8% will be applied for ordersshipped within the state of California.

Damage InShipping:

Email orcall us First! We will work with you to get the case resolved in the fastest method.

Return / Refund If you are not 100% happy with yourpurchase, please contact Us. Please don't directly opened a request orcase without informing us, or else, we will do some discounts on thewarranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲Allreturns must be made within 14 days of delivery date. Items must be innew, unused condition, with all original materials included with theshipment. A partial refund may be applied for opened or damaged items,depending on the condition.
▲Itemsreturned under the buyer’s remorse: The return shipping fee must becovered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will becharged.
▲Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges.
▲Allreturns require a RA (Return Authorization) number that will be given byour seller. Please contact with us at first for more details.

Defective & Damaged Products

▲Ifproduct was received damaged or not as described, please send us somepictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS,remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacementor refund of defective or damaged products can only be returned inexchange for the exact same product, or else, the purchase price willberefunded back to your original payment method.
▲Ifan item is received damaged, customer service must be contacted within7days of receiving your item.All returns require a RA (Return Authorization) number as above.

Payment eCheck Issues:Paymentsvia eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments foryou. Warranty & response ▲6months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Anywarranty shipping cost to us is responsible by buyer.
▲Anyshipping cost to buyer is responsible by the seller.
▲Wecommittee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it's very important forus. Thanks very much.

On May 23, 2025 at 18:46:37 PDT, seller added the following information:

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design