BANFLUXION® 200-240V Oil-type Mold High-precision Temperature Controller Machine 3PH 12KW
The KMW series mold temperature controller is an industrial device specifically designed for precisely controlling the temperature of molds (or other equipment such as reactors and rollers). Acting as a \"precision air conditioning system\" for the mold, it ensures that the mold remains within the optimal temperature range required by the process throughout production. The equipment circulates thermal oil (mineral oil, synthetic oil, etc.) through the mold to maintain precise temperature control, thereby ensuring consistent product quality. This makes it ideal for injection molding and other industrial applications.Voltage:AC200-240VPhase number:3Type:Oil-type mold temperature controllerTotal Power:12.75 kWHeat Transfer Medium:Thermal oil (strictly prohibit mixing oil with water)Pump Power:0.75 kWPump Flow Rate:56 L/min Pump Working Pressure:4.4 lbs/cm² (2 kg/cm²)Circulating Oil Pipe Size:3/8\" (0.95cm), 4 inlet and 4 outletHeater Power:12 kWTemperature Control Range:68-356℉ / 20-180℃ (adjustable)Heating Cylinder Material:304 stainless steel seamless pipePackage size:34.65\"*16.14\"*30.71\" (88cm*41cm*78cm)Net weight / Gross weight:82.6lbs(37.5kg) / 122.3lbs(55.5kg)WARNING: Unauthorized replacement of internal electrical components or modification of wiring may lead to equipment damage or other unforeseeable hazards. Please avoid the following actions:
- Opening the control box door while the power is on.
- Touching the machine or controller with wet hands.
WARNING: Operation by untrained and unauthorized personnel may result in unknown risks. Therefore:
- Equipment operators must receive training in advance.
- Any attempt by unauthorized individuals to operate the device must be immediately stopped.
WARNING: When the equipment is placed on an uneven floor or the casters are not locked, there is a risk of tipping and rolling. Therefore:
- The equipment must be installed on a level ground.
- Lock the bottom casters or tighten the corresponding fixing screws before use.
WARNING: When performing maintenance on electrical components, disconnect the main power supply in advance and ensure the equipment is de-energized before starting any operation.
- Replace fuses only with the same specified rating; never short-circuit the fuse holder.
- If electrical components become damp or exposed to water, metal parts of the equipment may corrode or rust, potentially leading to short circuits in severe cases.
WARNING: During operation, the internal system is under high temperature and high pressure. Direct contact may result in severe burns.
- Before conducting pipeline maintenance, allow the equipment to cool down and depressurize fully.
- Ensure the system is at normal temperature and pressure before any intervention.
Efficient Airflow Design for Stable Performance
The machine features a large number of ventilation openings on the housing, forming efficient airflow paths. This design quickly dissipates heat generated by the internal electrical control system and heating devices, effectively preventing performance degradation or shutdown caused by overheating. Even under continuous high-load operation, it ensures precise and stable temperature control.
Emergency Stop Switch
The emergency stop switch is a key safety device of the mold temperature controller. Once triggered, it immediately cuts off the main power supply to the equipment, bringing all operating components such as the heater and pump to an instantaneous stop. This achieves an emergency shutdown, prevents accident escalation, and protects operator safety as well as the mold and equipment from further damage.
Easy Mobility and Stable Positioning
The equipment is equipped with four swivel casters on the bottom, two of which are fitted with brake locks. This design allows the equipment to be moved easily and flexibly to the desired location within the workshop. Once in position, engaging the brake locks ensures that the equipment remains stable and stationary during operation, thereby ensuring safety and stable performance.
Control Panel
The PID control algorithm enables automatic adjustment of heating and cooling intensity and duration based on the deviation between the set target temperature and the actual temperature, thereby achieving high-precision, low-fluctuation temperature control. Combined with high-precision sensors and a clear digital display, operators can intuitively view and set temperature parameters, simplifying the operation process. This user-centered design combines ease of operation with powerful functionality, thereby achieving efficient management.
Standardized Interface – Safe & Leak-Proof
The \"Mold Outlet\" and \"Mold Inlet\" feature industry-standard threaded connections, enabling quick and secure assembly. These interfaces are made from robust, durable materials and equipped with precision-machined sealing surfaces, effectively preventing leakage at connection points. Even under high temperature and high pressure, they ensure long-term reliability and stable operation.
- Oil-type mold temperature controller: Uses heat transfer oil as the medium, suitable for higher temperature applications.
- Heating cylinder: Made of 304 stainless steel seamless pipe to reduce pipe resistance and rust scale.
- PID control for heating/cooling operations to regulate the medium temperature and achieve high-precision temperature control.
- Safety protection functions: phase loss protection, low fluid alarm, overheat protection, overload protection, etc.
- Audible alarm and indicator lights: heating indicator light, pump overload protection flashing indicator light, phase reversal indicator light, low liquid level indicator light for easy operation.
- Programmable timer: allows setting automatic start/stop time for unattended operation.
Operating Instructions
I. Equipment Commissioning:
1. Complete the piping and electrical connections.
2. Turn on the equipment power and check whether the parameter settings are correct.
3. Observe whether the controller display matches the actual output and whether all components are operating normally.
4. Run the equipment within the specified operating range for 2 to 3 hours.
5. Check whether the equipment is operating normally and whether all data are within the normal range.
CAUTION: Never use salt-based anti-freeze mixtures, as they are highly corrosive and will damage the equipment!
II. Power On/Off
1. Check that power supply is available.
2. Turn on the power switch of the control box.
3. After power-on, the system will have a delay of several seconds. The PV display will show the software version code, and the SV display will show the remaining delay time. When the delay ends, the system will automatically enter the Main Operation Interface.
4. To start: Set the desired temperature and press the \"Start\" button.
5. To stop: Press the \"Stop\" button.
Item Included (053403)
12KW Oil Type Mold Temperature Controller Machine Plastic/Chemical Industry 200-240V 3PH*1
You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Warranty & response▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.
On Apr 27, 2026 at 20:29:27 PDT, seller added the following information:
On Apr 29, 2026 at 00:09:32 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.