2-30A High Current Remote Control Electronic Switch 3-30V Aerial Model Plant Protection RC Drone Water Pump PWM Signal Control
Description:
1.The product is made of high quality material, quality is guaranteed
2. The product has stable performance and long service life
3. The product is divided into high-voltage and low-voltage versions for customers to choose, the output current of 2A, 20A, 30A can be selected.
4.The product design is compact and very suitable for multi-scene use.
5. The product has a working indicator, LED slow flash means no output, LED long bright means output.
2A/20A product parameters.
Positive switch, low 1.5ms is closed, higher than 1.5ms is open.
With work indicator, LED slow flashing means no output, LED long bright means there is output
Working voltage: 3.0V-5V (low voltage version) / 3.0V-30V (high voltage version)
Output current: 2A (low voltage version) / 20A (high voltage version)
Switching is controlled by the two-stage switch on the remote control.
Low-voltage version: power plugged into the receiver, the same input and output voltage
30A product parameters:
Name: Electronic Switch
Input voltage: 3.7-27V
Output current: 30A
Control Signal:PWM
Output connector:JST female
Input connector:JST male
Control connector: JR male
Note:This electronic switch is recommended to be controlled by a 2-section switch, with half of the rudder for each of the on and off travels, and an LED light to indicate when the switch is open, and the current should not exceed the nominal value, otherwise it may cause the wire to heat up or burn the electronic switch.
Package include:
Electronic switch X1
2-30A High Current Remote Control Electronic Switch 3-30V Aerial Model Plant Protection RC Drone Water Pump PWM Signal Control 3. The product is divided into high-voltage and low-voltage versions for customers to choose, the output current of 2A, 20A, 30A can be selected. 5. The product has a working indicator, LED slow flash means no output, LED long bright means output. With work indicator, LED slow flashing means no output, LED long bright means there is output Low-voltage version: power plugged into the receiver, the same input and output voltage Note:This electronic switch is recommended to be controlled by a 2-section switch, with half of the rudder for each of the on and off travels, and an LED light to indicate when the switch is open, and the current should not exceed the nominal
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.