1PC NEW 23040 Ralph Static Starter Teaching InstrumentsStructure:1, Electricity storage ball
2、Adjustment screw
3、Collector comb
4、Belt pulley
5、Plexiglass cylinder
6. Like tape
7. Electric motor
8、Incandescent light switch
9、Base
10、Power switch
11、Grounding jack
12, dry incandescent lamp
13、Discharge ball
14, Discharge ball insulating rod1. Use
This instrument can produce tens of thousands of volts of electric potential, as a high-voltage electrostatic source of electrostatics experiments, can be used to demonstrate the nature of charge,
distribution; explain the principle of electrostatic induction; show power lines and tip discharge phenomenon.
It is an indispensable equipment for laboratories in schools and universities.2, the main technical parameters
Power supply voltage: AC 220V
Power consumption: 70W
Electricity storage ball diameter - φ200mm
Discharge ball diameter: 60mm
Spark distance; ≥ 60mm
Peripheral volume: 300 × 200 x 60Usage
1. Before using the storage ball, pulley, rubber belt, plexiglass round simple, discharge ball surface with a clean soft cloth, be sure to maintain a dry and clean state.
2. Adjust the screw 2, adjust the tape 6, make the tape loose and tight together transportation.
3. Collector comb 3 should be as close as possible to the rubber tape, but can not be contacted.
4. Insert the discharge ball 13 wire into the grounding jack 11.
6. Remove the accumulator ball on the hemisphere, turn on the power. Try to turn a few minutes, such as the climate tide selection, you can turn on the switch at the same time 8, with a light bulb baking, out of the internal moisture. Can be used.1. Packing: 1pc2. Warranty period: 90 days
On Dec 25, 2023 at 03:59:16 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.