19 Inch Rack Mount Compatible with 1RU for Router and Controller, Black

• CLEAR YOUR SHELVES — Loose equipment and separate shelves turn your network cabinet into a jumble. This rack mount puts your router and controller together in dedicated mounting positions, so those units stop taking up separate shelf spaces. Bring your networking gear off the desk and into your equipment rack, keeping your home lab centered around one organized layout.
• USE ONE RACK UNIT — Leave the rest of your rack for the other equipment in your network. The mount fits a standard 19 inch, 1U rack layout, placing your router and controller in a single rack-unit space. Plan for a little adjustment during fitting, whether you are laying out a new home lab or reorganizing a network cabinet; check your rack format before choosing where the mount will go.
• SCREW RETAINED EQUIPMENT — Two screws retain each module, keeping your router and controller attached to their mounts. The two-part construction joins with machine screws and nuts, with superglue as an assembly option. Hardware required (not included): 2 × screws (retaining each module) 4 × #6 or #4 machine screws (joining the two halves) nuts #10 countersunk machine screws, approximately 0.75 inch long., nor is adhesive if your setup calls for it.
• MODEL SPECIFIC POSITIONS — Your router and controller are different pieces of equipment, and this mount gives them different mounting positions to match. The controller sits alongside the router, keeping the pair together as you lay out your home lab. For an installer organizing a small network cabinet, each unit has its own spot rather than sharing an open shelf with the rest of your equipment.
• CONNECTIONS FACE YOU — Reach your router and controller ports from the front of your equipment rack when it is time to connect or change a cable. The mount positions the equipment facing forward, keeping ports and cabling accessible after installation. WHAT\'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).

Your router and controller are taking up separate shelves or sitting loose in your network cabinet. You want them in the rack, not spread around the equipment you are trying to organize.

The SplashNColor router and controller rack mount brings them together in a standard 19-inch, 1U layout. Your router has its own mounting position, with a different, model-specific position for your controller alongside it. The pair occupies a single rack-unit space instead of needing separate shelves, leaving the rest of your rack available for the other equipment in your network.

Your connections face forward. When you add a cable, change a connection or work through a network update, the equipment ports and cabling stay accessible from the front. You spend that time working on the connections rather than turning loose equipment around on a shelf.

Two screws retain each module in its mounting position. The mount has a two-part construction joined with machine screws and nuts; superglue is another assembly option. Plan for a little adjustment when fitting the mount into your rack, and check that your rack uses the standard format before organizing the layout around it.

For home-lab users, network installers and people organizing a small network, this mount puts the router and controller where the rest of the networking equipment belongs.

HARDWARE NOT INCLUDED: Only the item named in the title is in the box. Every setup is different: depending on yours, mounting it or attaching it to an existing part may use hardware you already have, such as the original screws, or you may need to buy your own screws, bolts, tape or adhesive to suit your situation. No hardware of any kind is included with this listing.

Hardware required (not included): 2 × screws (retaining each module) 4 × #6 or #4 machine screws (joining the two halves) Nuts #10 countersunk machine screws, approximately 0.75 inch long