500mm / 19.7in Full Automatic Microcomputer Film Cutting Machine 110V
Industrial Film Processing Equipment
500mm / 19.7in Full Automatic Microcomputer Film Cutting Machine
Precision cutting for PVC films, plastic sheets, insulating paper, fish paper and reflective films — fully automated, touch controlled and built for continuous production.
- 110V
- 250W
- 500mm Cutting Width
- ±0.2mm Precision
- Touch Screen Control
Product Overview
The electric film cutting machine is specifically designed for precisely cutting sheet materials (e.g. PVC films, plastic sheets), paper (e.g. insulating paper, fish paper) and films (e.g. reflective films, plastic films) into pieces with the required size. It features full automation, high precision and stability, touch control and high compatibility.
It is equipped with a touch control screen, allowing various parameters to be set and adjusted effectively as needed. The full automatic microcomputer film cutting machine can be widely applied to the industries of packaging, electronics, printing, decoration and so on, and is an ideal choice for film processing and cutting.
Product Parameters Voltage110V Power250W Cutting Width500mm (19.7in) Cutting Speed1–50m/min (3.28–164ft/min) Cutting Precision±0.2mm (0.007in) Operation ModeTouch Screen Machine Size180 × 82 × 109cm (70.87 × 32.28 × 42.91in) Net Weight141kg (310.8LBs) Precautions
- Ensure the power supply meets the power requirements of the machine, and that reliable grounding is achieved.
- Ensure the width of the membrane material does not exceed the rated width requirement, and align the film roll with the unwinding shaft so that feeding stays smooth and free of deviation.
- When using the machine for the first time or when replacing new materials, run a trial at low speed. Once feeding and cutting are confirmed to be normal, increase the speed appropriately.
- During operation, do not put hands into the machine, do not touch the running parts, and keep unrelated personnel away from the machine.
- Before cleaning and maintenance, turn off the power and unplug the machine.
- Replace parts in a timely manner when the blade is blunt or cracked, or when the rubber rollers are seriously worn.
Product Features Touch Control Screen
The LCD touch screen adopts a user-friendly human-computer interaction interface, achieving precision setting and adjustment of multiple cutting parameters. It facilitates real-time display and monitoring of the operating state, improving production automation and efficiency.
Cutting Assembly
The adjustable cutting blade set allows the cutting width to be adjusted, and adopts a precise guide rail and locking structure for firm positioning. This ensures the edge of the cut film is flat and free of burrs, effectively improving cutting precision and finish.
Film Feeding Frame
The film feeding frame is designed to stably support and reliably fix the film roll and to prevent the film from deviating during feeding. It offers high adaptability to film rolls of different specifications while ensuring high stability and feeding efficiency.
Film Discharging Assembly
The enlarged collecting plate is matched with L-shaped baffles, effectively collecting the cut film sheets and preventing them from falling off. The collecting plate is firm, durable, highly stable and reliable, attractive in appearance and long in service life.
Guide Assembly
Three parallel guide rollers combine to form a stable film feeding channel, effectively preventing the film from deviation, wrinkling or stretching deformation and ensuring smooth, uniform feeding. The guide rollers are wear resistant, corrosion resistant, flat and smooth.
Cabinet
The detachable storage cabinet stably supports the main unit and safely stores various materials. It has high structural strength and rigidity, is free of shaking or deformation during operation, and suits a wide range of working environments.
Operation Method
- Connect the machine to a 110V power supply with reliable grounding.
- Turn on the power switch, then turn the emergency stop switch in the direction of the arrows to reset it — the touch screen will light up.
- Set and adjust the cutting parameters as needed, then press the start key and the machine begins automatic cutting operation.
- When cutting is complete, press the emergency stop switch, turn off the power switch and unplug the machine.
- Collect the finished products and clean the machine thoroughly.
Product Display Item Included (122032) 1 × Full Automatic Microcomputer Film Cutting Machine 110V Shipping & After-Sales Service Shipping & Handling
Default shipping cost or free shipping service is only for the lower 48 United States, delivered by UPS Ground or USPS. For other areas or other shipping methods, please contact us in advance.
Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries and areas will incur extra shipping costs.
Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of an incorrect or undeliverable address are to be undertaken by the buyer.
Handling time: shipping is usually arranged within 1–3 business days after payment clears. Orders are processed Monday to Friday, not on weekends or public holidays.
Return & Refund
If you are not 100% happy with your purchase, please contact us first so we can help resolve the situation quickly.
All returns must be made within 14 days of the delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on their condition.
For buyer-remorse returns, the return shipping fee is covered by the buyer, the original shipping cost is deducted from the refund, and a 15% restocking fee of the item purchase price is charged.
Returns resulting from seller error receive a full refund of the item as well as the shipping charges. All returns require a return authorization number provided by us — please contact us first for details.
Payment
Please note that payments made via eCheck do not clear immediately. You will usually need to wait 5–7 days after checkout for the payment to clear, after which we will arrange shipment for you.
Any sales taxes or customs duties are not included. If they arise, they must be undertaken by the buyer. Sales tax of 8% is applied to orders shipped within the state of California.
Warranty & response
A 6-month warranty is provided for the machines, not for the consumables. We stand behind our products, so even after the warranty period has expired you can still seek service or technical support from us at low cost.
Any warranty shipping cost to us is the responsibility of the buyer, while any shipping cost to the buyer is the responsibility of the seller.
We are committed to customer satisfaction and want to bring you the best purchase experience. If there are any problems, please contact us as soon as possible — and if everything is fine, a positive response would mean a great deal to us. Thank you very much.
Full Automatic Microcomputer Film Cutting Machine 110V · Model 122032
On Nov 9, 2026 at 19:43:11 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.