15.6" Vital Signs Patient Monitor ECG NIBP SPO2 TEMP RESP PR ICU Hospital

15.6\" Patient Monitor ICU CCU Vital Sign For Hospital ECG NIBP RESP TEMP SPO2 PR
Standard Parameters:
ECG, RESP, TEMP, NIBP, SPO2, PR

Features:
1.15.6 inch large screen for viewing convenience.
2.Three Working Modes: Monitoring, Surgery and Diagnosis.
3.Simple and friendly operating display interface.
4.Multi-display modes suitable for different applications: Standard Interface, Large font, ECG Standard Full Display, OXY , Trend Table, BP Trend.
5.Built-in high capacity battery up to 3 hours of continuous work.
6.VGA output for external display.

Technique Specification:
ECG
1.Lead Mode: 5 Leads (I, II, III, AVR, AVL,AVF, V)
2.Gain: 2.5mm/mV, 5.0mm/mV, 10mm/mV, 20mm/mV
3.Heart Rate: 15-300 BPM (Adult); 15-350 BPM (Neonatal)
①Resolution: 1 BPM
②Accuracy: ±1%
③Sensitivity >200 uV(Peak to peak)
4.ST measurement range: -2.0 ~ +2.0 mV
①Accuracy: -0.8mV~+0.8mV: ±0.02mV or ±10%, which is greater
②Other Range: unspecified
5.Sweep speed: 12.5 mm/s, 25mm/s, 50mm/s
6.Bandwidth:
①Diagnostic: 0.05~130 Hz
②Monitor: 0.5~40 Hz
③Surgery: 1~20 Hz

SPO2
1.Measuring Range: 0 ~ 100 %
2.Resolution: 1%
3.Accuracy: 70% ~ 100% (2 %)
4.Pulse Rate: 20-250 BPM
5.Resolution: 1 BPM
6.Accuracy: 3 BPM

NIBP
1.Method: Oscillometry
2.Measure mode: Manual, Auto, STAT
3.Unit: mmHg, kPa
4.Measure and alarm range:
4.1Adult Mode
①SYS 40 ~ 280 mmHg
②DIA 10 ~ 225 mmHg
③MEAN 20 ~ 240 mmHg
4.2Pediatric Mode
①SYS 40 ~ 220 mmHg
②DIA 10 ~ 160 mmHg
③MEAN 20 ~ 170 mmHg
4.3Neonatal Mode
①SYS 40 ~ 135 mmHg
②DIA 10 ~ 100 mmHg
③MEAN 20 ~ 110 mmHg
5.Resolution: 1mmHg
6.Accuracy: 5mmHg

RESP
1.Method: Impedance between RA-LL or RALA
2.Measurement Range:
①Adult: 10 ~ 120 BrPM
②Neonatal / Pediatric: 7 ~ 150 BrPM
3.Resolution: 1 BrPM
4.Accuracy: 2 BrPM

TEMP
1.Measure and Alarm Range: 0 ~ 50 C
2.Resolution: 0.1C
3.Accuracy: 0.1C

Standard Configuration:
1.Main Unit *1
2.5-lead ECG cable *1
3.Disposable ECG Electrode *5
4.Adult Spo2 probe *1
5.Adult NIBP cuff *1
6.NIBP extension tube *1
7.Temperature probe *1
8.Power Cable *1
9.User Manual *1
10.Fuse *1 FDAStatement:
Thanksforyourunderstanding!