Automatic Edge Banding Machine 110V
The multi-function sealing and repairing machine is mainly used for sealing the edge of the plate section. It has compact structure, reasonable layout, beautiful appearance, with straight edge sealing, double-sided gluing, automatic tape breaking, pneumatic head, automatic plate feeding, upper and lower trimming, double-sided polishing and other functions.
Product parameter:
Voltage: 110V
Edge speed: 0-6m/min
Conveying speed: 0-15m/min
Self-propelled motor power: 60W
Conveyor motor power: 25W
Polishing motor power: 400W
Edge cutting machine power: 800W
Edge thickness: 0.03-0.05in (0.8-1.5mm)
Edge height: 0.47-1.57in(12-40mm)
Heating time: 5-15min
Adhesive volume: 0.26Gal (1000ml)
Trimming method: Double-sided trimming
Adhesion method: Double-sided adhesive coating
Control mode: Intelligent temperature control
Disconnection mode: Automatic strip breaking
Features:
1. First of all, it can be directly applied to the plate straight edge sealing operation, and the edge sealing efficiency is high.
2. Multi-functional microcomputer sealing machine through the special structural design, can make the plate with the edge sealing machine tape at the same time, to ensure that the paste is more uniform, more firm, the edge sealing effect is more perfect. The special design of the glue pot increases the volume of the glue pot and greatly reduces the preheating time, which can ensure sufficient melting amount.
3. Manual feeding coupled with manual control and motorized roller pressure mode can accurately and quickly carry out the edge sealing process, each part of the work design is strict and orderly, no degumming overflow phenomenon.
Scope of use:
Suitable for side sealing: flexible melamine-impregnated paper, wood veneer, plastic and other furniture edge sealing materials, the rubber surface must be smooth.
Plastic side sealing tape: must be coated with hot melt adhesive when heated without deformation. Plastic side tape, coated surface must be pre-coated with back adhesive (can make the back side tape and hot melt adhesive adhesive activator).
Suitable for hot melt adhesives: medium and low temperature hot melt adhesives with melting point below 120℃-170℃.
Suitable for the workpiece frame: can be bonded with hot melt wood, flower board, medium fiber board, particle board and other plate frame.
Usage method:
1. Connect the power supply.
2. Adjust the height of the edge banding strip inlet, edge banding speed, etc. properly.
3. After turning on the machine, it takes about 10 minutes for the temperature of the hot melt adhesive to reach the set temperature of 170℃.
4. Start edge banding.
Notes:
1. Start edge banding only after the temperature reaches the set temperature.
2. When the machine is heating, do not put your hand into the edge strip groove to avoid burns.
3. During use, do not set the moving speed of the micro edge banding machine too fast or too slow. It should be controlled within an appropriate range.
Item Number: 1* Automatic Edge Banding Machine 110V (033365)
You can make order with no worry.
Any concerns just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
On Jan 4, 2026 at 21:58:46 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.