新建网页 4
110V Desktop Automatic Capping Machine for Water&Drink Bottles Caps
Capping for 1.18–3.93in Dia. Bottle
The bottle body with the cover is put on the conveyor belt, and after continuously entering the cap rubbing machine, the bottle body is separated by a broken distance by the bottle splitter. When the bottle body continuously enters the cap rubbing machine, the bottle holder closes and clamps the bottle body. At the same time, the capping device and the capping head work at the same time, and tighten the cover at the corresponding time. However, the capping device, the capping head and the bottle holding device are loosened at the same time, and the bottle body with the cap screwed out of the capping machine.
Product Parameters:
Voltage 110V / 60Hz Total Power 500 W Conveyor Belt Speed 0–0.7 m/min (0–2.3 ft/min) Bottle Height Range 1.96–7.48in (5–19cm) Bottle Diameter Range 1.18–3.93in (3–10cm) Production Speed 20–60 bottles/min Capping Torque 3–8 N·m
Precautions!
NOTE: An air compressor is required for operation. This equipment does not include an air compressor; it must be supplied by the user.
1. Before use, the equipment housing must be properly grounded to prevent the risk of electric shock.
2. In case of any sudden abnormal condition, press the emergency stop switch immediately to deactivate all electrical components of the machine.
3. While the equipment is in operation, do not place hands or any part of the body near the conveyor belt, capping head, or cylinder movement areas to avoid crushing or pinch injuries.
4. The pneumatic system must maintain normal operating air pressure. Production is prohibited when air pressure is insufficient. Regularly inspect the condition of the air lines and pressure gauge.
5. Before performing any inspection, adjustment, or maintenance work, be sure to cut off the power supply and shut off the air source to prevent accidental startup and personal injury.
6. Severely worn wear parts such as the capping rollers must be replaced promptly. If any component fails to rotate or operate properly, cut off power and air supply first, then check the electrical circuits, motor, solenoid valves, and sensors for faults.
7. Pay attention to sensor status during operation. If a sensor is damaged or malfunctioning, do not continue operating the machine.
8. Do not arbitrarily modify the internal electrical wiring of the equipment. Non-professionals are not allowed to disassemble the motor or electrical control components.
9. When the equipment is not in use, be sure to turn off the main power switch.
10. After operation, clean any debris from the machine surface in a timely manner to keep the equipment clean and tidy.
Operation Method:
1. Position the equipment and adjust the leveling feet to level the machine. Confirm that the equipment is properly grounded, then connect the power supply and air source.
2. According to the bottle size to be processed, adjust the spacing of the conveyor guide rails and the bottle separating mechanism to ensure that bottles can pass smoothly through the conveyor channel without jamming or tipping over.
3. Adjust the overall height of the capping head and the position of the capping rollers so that they fit the bottle caps properly, completing the capping position calibration.
4. Turn on the power, select the desired language on the touchscreen to enter the main operation interface. Access the parameter settings page to configure various delay and timing parameters as needed.
5. Switch to manual mode to test the conveyor motor, capping motor, and each cylinder individually, ensuring that all mechanisms operate smoothly without any sticking or jamming.
6. After manual test runs show no abnormalities, return to the main interface and press the run button to enter automatic mode. Place capped bottles onto the conveyor table. The bottles will be carried into the station by the conveyor belt, and the machine will automatically complete the entire process: bottle separation → bottle clamping → capping → release → discharge.
7. When production is complete, press the stop button to halt automatic operation. In case of emergency, press the emergency stop switch immediately. After all work is finished, turn off the power and air supply, and perform equipment cleaning.
Product Features:
1. The machine features an integrated desktop design with movable casters and leveling feet for easy relocation and seamless integration with production lines.
2. Equipped with a touchscreen that supports bilingual language switching (Chinese/English), the system offers multiple operating modes including automatic operation, manual debugging, parameter settings, and production count statistics.
3. An emergency stop switch is provided to quickly shut down the machine in case of emergencies, enhancing operational safety.
4. A clamping and positioning mechanism automatically secures the bottle as it enters the station, while the capping unit simultaneously completes the capping process. After capping, the bottle is automatically released and fed out, enabling continuous automated operation.
5. The guide rails, bottle spacing mechanism, and capping height are all adjustable to accommodate various bottle sizes and cap specifications.
6. Combining mechanical and pneumatic systems, the machine is easy to debug and maintain, making it simple for operators to learn and master.
7. The machine has a wide range of applications, suitable for various types of round threaded caps, including beverage caps, pump caps, cosmetic caps, laundry detergent caps, and more. It meets the capping production needs of multiple industries such as daily chemicals, beverages, and others.
Item Included:
110V Desktop Automatic Bottle Screw Capping Machine(160013)
Shipping & HandlingDetails
Default Shipping Cost or Free Shipping Information:
▲Defaultshipping cost or free shipping service is only for thecustomers from Canada or the lower 48 United States byCanada Post, USPS orthe UPS Ground.Customers from other areas or needs other shipping ways, please contact us.
▲Buyersfrom Guam,Puerto Rico, Virgin Islands, American Samoa,Alaska,Hawaii,PO Boxes, APO/FPO addresses or othercountries/areas,thereWILL be extra shipping costs, please contact us for more detailedinformation.
▲Pleasemake sure your address is valid for both UPS and USPSservices. Anycosts incurred because of incorrect orundeliverable address shouldbe undertaken by buyer.
Handling Time:Shippingis usually made in 1-3 business days after paymentscleared. Orders are processed fromMonday-Friday; Not on the weekends & publicholidays.
Sales tax/Customsduties:Anysales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage InShipping:Emailor call us First! We will workwith you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with yourpurchase, please contact Us. Please don\'t directly openeda request or case without informing us, or else, we willdo some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲Allreturns must be made within 14 days of delivery date. Itemsmust be in new, unused condition, with all originalmaterials included with the shipment. A partial refund may be applied for opened or damaged items, depending on thecondition.
▲Itemsreturned under the buyer\'s remorse: The return shipping feemust be covered by the buyer;The original shipping costwill also be deducted from the refund. 15% restocking feeof the items purchase price will be charged.
▲Returnsthat are the result of our seller\'s error: Buyer willreceive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲Ifproduct was received damaged or not as described, pleasesend us some pictures or videos, so we could wellunderstand your problem, then solve them for you ASAP.Besides, it\'s much helpful for us to claim with UPS,remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacementor refund of defective or damaged products can only bereturned in exchange for the exact same product,or else,the purchase price will be refunded back to your originalpayment method.
▲Ifan item is received damaged,customer service must becontactedwithin 7 days of receiving your item. Allreturns require a RA (Return Authorization) number asabove.
Warranty & response
▲6months\' warranty for the machines, not for the consumables.We standbehind our products all the item,so even if yourwarranty periodhas expired, you canstill seek for service or technical supportfrom us with low cost.
▲Anywarranty shipping cost to us is responsible by buyer.
▲Anyshipping cost to buyer is responsible by the seller.
▲Wecommittee to the customer satisfaction and want to bringyou the best purchase experience. If there is anyproblems,please contact us ASAP. If not,please leave usa positive response as it\'s very important for us. Thanksvery much.
On Sep 14, 2026 at 23:49:59 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.