INTBUYING® | Automatic Wire Brushing & Twisting Machine - Technical Specs INTBUYING® Automatic Twisting and Stranding Machine Wire Brushing and Twisting Machine 110V Product Overview The automatic wire brushing and twisting machine is a compact desktop device specially designed for processing shielded wires, braided wires, ground wires and other wires. It uses rotary brush rollers to process wire ends, providing consistent results for electrical assemblies and wire preparation tasks. It can brush open the braided layer, separate wires and twist the wires in one pass. It features adjustable rotation speed, forward/reverse rotation control and foot pedal control, replaces the manual wire twisting operation, and improves the processing efficiency and consistency. The automatic wire brushing and twisting machine can be widely applied to the fields of electronic wire harness processing, communication equipment, wire repair, etc. Product Parameters Voltage110V 60Hz Motor Power15W FunctionsWire Brushing, Splitting, Twisting Speed ControlAdjustable (Variable) Rotation DirectionForward/Reverse Twisting Length Range0.2\'\'-2\'\' (5-50mm) Air Supply RequiredNo Packing Dimension13.39*13.39*11.02 inches (34*34*28cm) Net Weight / Gross Weight15.2LB (6.9kg) / 17LB (7.7kg) Precaution
- 1. Keep hands, fingers, and loose clothing away from the brush rollers during operation.
- 2. Do not attempt to feed wire into the brushes by hand while the rollers are running.
- 3. Never switch the forward/reverse direction while the brush rollers are rotating at high speed. Always allow the brushes to stop completely before reversing direction.
- 4. Do not operate the machine with the guards removed or with any safety interlocks defeated.
- 5. Ensure the work area is well-lit and free of clutter.
- 6. Do not operate the machine if the power cord, adapter, or foot pedal cable is damaged.
- 7. Keep the machine dry. Do not operate in wet or damp conditions.
- 8. Disconnect power before performing any maintenance, cleaning, or brush replacement.
- 9. Wear appropriate eye protection when operating the machine. Small wire fragments may be ejected during processing.
- 10. Do not exceed the machine\'s rated workload. Allow the motor to cool between extended operating cycles.
Product Features 1. High Efficiency: Replacing manual twisting operation, saving the labor, improving the processing efficiency.
2. High Adaptability: With adjustable rotating speeds and directions, supporting multiple wires of different specifications, achieving tight and burr-free twisting, and avoiding the manual operation error.
3. Stable Structure: Small and compact in structure, small in occupied space, and easy to carry.
4. Low Cost: Adopting wear-proof brushes, low fault rate and low maintenance cost.
5. Safety Protection: With foot switch control, avoiding accidental operation and reducing the accidents and risks. Features & Advantages Brush Rollers
The machine is equipped with multiple rotary brush rollers arranged in a line. These brushes grip and process the wire when the machine is in operation. The brushes are made from durable synthetic materials and designed to handle repeated contact with insulation wires and conductors. Over time, brushes will wear and require inspection or replacement.
Wire Twisting Clamp
The wire twisting clamp is made of high-hardness metal materials, has high rigidity and is not prone to deformation or wear. It can elastically clamp different wires in a self-adaptive mode, and there is no need to frequently replace clamps. The wire twisting precision is higher, and the wire integrity is well protected. The clamp must be oriented correctly for proper operation.
Speed Regulator
The speed control knob allows the operator to adjust the rotational speed of the brush rollers. The control is marked from Slow to Fast. The speed can be adjusted on the basis of the wire gauge and material type being processed. Lower speeds are generally recommended for finer wires or when learning to operate the machine.
Foot Switch
The foot switch can precisely control the wire brushing and twisting operation during operation, gives a quick response to control instructions and meets different processing requirements. It allows the operator to keep both hands free for wire positioning. The brush rollers will run only while the pedal is pressed.
Operation Method
- 1. Place the machine on a flat, stable work surface with adequate clearance around all sides.
- 2. Connect the power adapter to the rear panel of the machine. Plug the power adapter into a grounded electrical outlet rated for 110V at 60Hz.
- 3. Connect the foot pedal cable to the corresponding port on the rear of the machine.
- 4. Check all parts are intact and secure before operation.
- 5. Turn on the main power switch, set the desired brush roller speed via the speed control knob, and select the forward/reverse rotation direction via the switch.
- 6. Press the foot pedal to activate the brushes. Place the wire into the gap between the brush rollers to process it. Release the foot pedal to stop the brushes.
- 7. Place the wire into the twister clamp correctly, and the wire can be twisted quickly.
- 8. After operation, turn off the main power switch at the rear panel, and unplug the power adapter.
Item Included (056823): 1 x Wire Brushing and Twisting Machine 110V You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
On May 20, 2026 at 00:21:42 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.