Fully Automatic Desktop Conveyor Table Capping Machine Cap Rubbing and Pressing Integration Machine 110V
The automatic desktop conveyor table capping machine is a professional cap rubbing and pressing integration machine for capping different bottle shapes in the industries of food, pesticide, cosmetics and so on. It has the advantages of attractive appearance, high capping speed, sensitive operation and high qualification rate. The operator only needs to put the bottle cap on the bottle mouth. The bottle cap is automatically tightened by the cap rubbing wheel during the bottle moving forward. The machine can be combined with the labelling machine, filling machine and conveyor to form production lines, and can also be independently used.
Note that the air pressure should reach 0.6MPa to work normally. Please ensure the air pressure of the air pump when the machine is working.
Notice:We only sell machines, do not match air compressors,customers need to buy their own .
Product parameter:
Conveyor belt speed0~7m/minProduction speed10-30 bottles/minScrew cap torque3-8N.mBottle height50-190mm (1.97\'\'-7.48\'\')Bottle diameterCap diameter20-100mm supply 110V/50-60HzTotal power500WMachine size 130x55x100cm (51.18\'\'x21.65\'\'x39.37\'\')Net weight75.5kg (166.45LBs)
Feature:
Touch Screen
The intelligent touch screen clearly displays different parameters, allowing the operator to freely adjust and monitor various parameters as required and improving the operation convenience.
Driving Motor
The high-quality copper motor is adopted to drive the machine to run smoothly, has stable performance, long service life, low maintenance cost and noise and high adaptability.
Speed Regulator
The operator can easily adjust the conveying speed of the conveyor belt as needed through the speed knob, and the equipment safety and personal safety can be well guaranteed.
Height Adjusting Handwheel
The height adjusting handwheel can be used to adjust the press height of the capping machine according to the bottle height, and height adjustment is easy, convenient and quick.
Bottle Separation Sensor
The bottle separation sensor can sense the bottle and give a separation instruction to the baffle to block the remaining bottles until capping of the first bottle is completed, and the response is quick.
Pressure Gauge
The pressure gauge can clearly display the air pressure in real time, facilitating real-time monitoring and early warning. The air inlet is connected with the air compressor and has simple operation and stable performance.
Chain Plate Conveyor Belt
The chain plate conveyor belt can convey various bottles smoothly and stably, effectively saving time and labor, and achieving high conveying efficiency and low cost. The guardrails on the two sides are adjustable.
Fiber Optic Amplifiers
The fiber optic amplifiers are designed for adjusting the sensitivity of the sensor electric eyes according to the actual situation, and coarse adjustment and fine adjustment of the sensitivity can be conducted as needed.
Tool Box
The tool box is provided for storing tools and auxiliaries of the machine and protecting them from damage and loss, is convenient to carry and use, and effectively improves the practicability.
Product analysis:
1. Touch screen
2. Power switch
3. Start switch
4. Emergency stop switch
5. Speed regulation knob
6. Cap rubbing machine photoelectric sensor
7. Conveying chain plate
8. Guardrail
9. Cap press head
10. Height adjusting handwheel
11. Cap screwing motor
12. Cap screwing size adjusting cylinder
13. Bottle separation photoelectric sensor
14. Guardrail support
15. Bottle separation cylinder
16. Rubbing wheel
17. Cap press cylinder
18. Cap press head
19. Cap press detection photoelectric sensor
20. Bottle holding cylinder
Operation Method:
Capping process: bottle entry → bottle separation → capping → bottle discharge
A. Place the bottles on the conveyor belt.
B. Bottle separation cylinder obstructs and releases the bottles.
C. The capping motor is working.
D. After capping, the bottles are transported to the rear of the conveyor belt.
Attention:
To ensure safe production, please read the following precautions carefully:
1. Use the power supply and air source that conform to the requirements of this machine. The stability of the air source must be maintained under continuous working conditions.
2. After the power switch is turned off, there is still voltage in some circuits in the electrical control of this machine. When repairing the control circuit, please be sure to unplug the power cord.
3. Do not put your hands on the capping wheel and the capping head when working, and pay attention to personal safety.
4.When there is a problem with the machine, press the emergency stop button directly to suspend all work.
Item number : 160654
Automatic Desktop Conveyor Table Capping Machine 110V
You can make order with no worry.
Any concerns just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
On Jan 19, 2026 at 21:44:04 PST, seller added the following information:
On Jan 20, 2026 at 17:24:34 PST, seller added the following information:
On Jan 30, 2026 at 19:25:25 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.