110V 2.5KW 1200°C Programmable Muffle Furnace for Laboratory Sintering & Heat Treatment
150mm*150mm*150mm
Intelligent Programmable Control: 51-segment program setting (ramp, soak, cycle) for complex sintering/annealing/ashing. Built-in timer for automated operation.Precise PID Temperature Control: Advanced PID with over-temperature protection, outstanding stability & uniformity for reproducible results.Robust Safety & Construction: High-quality alumina fiber insulation, energy-saving, automatic cut-off & over-temperature protection.Wide Applications: Sintering (ceramics/metals), heat treatment, thermocouple calibration, quantitative analysis, materials research, ashing.This 1200°C Programmable Muffle Furnace is a robust and reliable laboratory furnace designed for a wide range of heat treatment applications requiring consistent performance and user-friendly operation. Operating on standard 110V voltage, it delivers 2.5KW of power through durable resistance wire heating elements, achieving a maximum temperature of 1200°C with a recommended long-term working temperature of 1100°C. Equipped with programmable controls and a timer function, it offers precise management of heating cycles. This model provides an ideal balance of performance and value for university labs, quality control departments, and industrial heat processing.
ITEM Chamber heating temperature:1200℃(2192℉)Rated temperature:1100℃(2012℉)Heating rate:≤10℃/minRecommended heating rate:5℃/minTemperature control accuracy:±1℃Heating element:Resistance wireProgrammable Segments:51 SegmentsTime setting:0-9999minPackage weight/Gross PRECAUTIONS
- It is strictly forofferden to burn flammable and explosive materials. It is strictly prohibited to process toxic, hazardous, or highly corrosive materials.
- New crystallization furnace, or long time unused: before normal use, waste zirconium block sintering 1-2 times to eliminate moisture inside the furnace.
- Always heat the furnace slowly and follow the recommended heating rate precisely.
- To protect the furnace from cleaning and intact, use a suitable sintering pan.
- Electric furnace uses special high-purity electric heating wire. Post-maintenance replacement: use original accessories.
- It is forofferden to disassemble the furnace and distribution box to avoid circuit failure.
- Cool furnace below 300°C before opening door, otherwise cold air causes thermal shock or lining crack.
- Check temperature of electrical control part of the temperature control system is good.
- The input power shall not exceed the rated power, furnace temperature shall not exceed rated temperature.
ITEM DETAILS
All-in-One Intelligent Control for Unmatched Clarity and Operation
Comprehensive control panel integrates PID controller, ammeter, voltmeter, main power switch, circuit breakers, fuse indicator, power/fan lights for real-time monitoring & enhanced safety.
Precision Temperature Sensing for Repeatable Results
High-quality thermocouple provides real-time response to PID controller, ensuring exceptional stability & uniformity for demanding sintering or heat treatment.
Precision-Engineered for Durability & Longevity
High-grade aluminum alloy via precision casting, anodized surface: corrosion resistant, anti-scratch, easy to clean, maintains integrity through rigorous lab use.
Secure Locking for Enhanced Safety & Efficiency
Robust door latch ensures sealed door during high-temperature operation, preventing accidental opening and improving thermal uniformity & energy efficiency.
Superior Thermal Barrier for Efficiency & Durability
Type 1430 alumina ceramic fiber lining, low thermal conductivity, rapid heating rates, energy efficiency, rated for continuous use up to 1430°C.
Optimized Ventilation for Uninterrupted Operation
Multi-directional ventilation design cools internal circuitry, prevents unexpected shutdowns due to heat buildup, ensuring long-term processes completed without interruption.
ITEM OPERATING INSTRUCTION
I. Preparation Before Operation
1. Inspect the Furnace: Ensure chamber clean and free of residues.
2. Load the Sample: Place sample into high-temp crucible, center of chamber, avoid touching heating elements.
3. Close the Door: Securely close to ensure proper seal.
II. Startup and Operation
4. Power On: Connect to 110V supply, green indicator lights.
5. Set Program: On digital controller, set program (heating rate, target temp, holding time).
6. Start Operation: Press \"Turn-On\" button then \"RUN\" button to initiate cycle.
7. Monitoring: Monitor during initial heating phase.
III. Shutdown and Unloading
8. Program Completion: \"Stop\" appears, heating stops automatically.
9. Critical Safety - Natural Cooling: NEVER open hot door. Cool to near room temperature (below 100°C).
10. After cooling, press \"Turn-Off\" button, then main \"Lock\" power switch.
11. Unload Sample: Wearing high-temp gloves, carefully remove sample.
Important Safety Warning: Always wear safety glasses and high-temperature gloves during operation. The processing of flammable, explosive, toxic, or highly corrosive materials is strictly prohibited. ITEM INCLUDED (057209)
- 1200°C Programmable Muffle Furnace *1
You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders processed Mon-Fri.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products; even after warranty period, service/technical support available with low cost.
SHIPPING & HANDLING DETAILS
Default Shipping Cost or Free Shipping Information:
▲ Default shipping cost or free shipping service is only for customers from Canada or lower 48 United States by Canada Post, USPS or UPS Ground. Other areas or other shipping ways, please contact us.
▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses: extra shipping costs, contact us.
▲ Please make sure your address is valid for UPS and USPS services. Any costs incurred because of incorrect address shall be borne by buyer.
Handling Time: Shipping usually in 1-3 business days after payments cleared. Orders processed Mon-Fri (not weekends/holidays).
Sales tax / Customs duties: Any sales taxes or customs duties not included. Buyer responsibility.
Damage In Shipping: Email or call us first. We will work with you to resolve fastest method.
RETURN & REFUND
If you are not 100% happy with your purchase, please contact us. Please don\'t directly open a request or case without informing us, else we will apply discounts on warranty and sales-services later on. Thanks for understanding.
Returns & Exchanges
- All returns must be made within 14 days of delivery date. Items must be in new, unused condition. Partial refund may apply for opened/damaged items.
- Items returned under buyer\'s remorse: return shipping fee by buyer, original shipping cost deducted from refund, 15% restocking fee charged.
- Returns due to seller\'s error: buyer receives full refund of item plus shipping charges.
- All returns require RA (Return Authorization) number. Contact us first for details.
Defective & Damaged Products
- If product received damaged or not as described, send pictures/videos for understanding and claim assistance.
- Replacement or refund of defective/damaged products: exchange for exact same product or refund to original payment method.
- If item received damaged, contact customer service within 7 days of receiving. RA required.
PAYMENT
eCheck Issues: Payments via eCheck do not clear immediately. Usually wait 5-7 days after checkout for clearance, then we arrange shipments.
WARRANTY & response
- 6 months\' warranty for the machines, not for consumables. Even after warranty period, service/technical support available at low cost.
- Any warranty shipping cost to us is responsible by buyer.
- Shipping cost to buyer is responsible by seller.
- We commit to customer satisfaction. For any problems, contact us ASAP. If satisfied, please leave positive response, very important for us. Thanks.
On Jun 10, 2026 at 00:33:57 PDT, seller added the following information:
On Jun 10, 2026 at 03:41:01 PDT, seller added the following information:
On Aug 17, 2026 at 19:16:55 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.