110-220V Digital LED Microcomputer Thermometer Temperature Controller Thermostat

Feature Products

110-220V Digital LED Microcomputer Thermometer Temperature Controller Thermostat

1: Widely used
2：Beautiful appearance
3：Convenient and simple
4: 1M waterproof cable probe
5: Easy to set up and understandSpecification
Product name:Microcomputer temperature controller
Temperature measuring range:-50~110~c
Temperature control range:-50~110℃
Temperature measurement accuracy:±0.2℃
Temperature control accuracy:±0.1℃
Measurement input: NTC10K L=1m waterproof probe
Input power:110V-220V
Output power:1500W
Output type:Direct output
Output capacity:max 10A
External dimensions:120*59*30mm
Code and function introduction
PO set start temperature
Press the set button to enter the internal menu, the default display is P0. Press the set button again to set the desired start temperature by pressing the up and down buttons.
P1 to set the stop temperature
Press the Set button to enter the internal menu, the digital display is P0, switch to P1 by pressing the up and down buttons, press the Set button again and set the desired stop temperature by pressing the up and down buttons.
P2 to set the temperature correction
Enter the internal menu in the same way, switch to P2 using the up and down buttons, press the set button again and set the desired calibration temperature using the up and down buttons. In the setting, if the detected temperature value is 0.5°C greater than the actual temperature value, then the desired calibration temperature is set to -0.5°C. If the detected temperature value is 0.5°C greater than the actual temperature value, then the desired calibration temperature is set to -0.5°C. If the detection temperature value is 1°C less than the actual temperature value, the calibration temperature to be set is 1°C. Detection temperature ± calibration temperature = actual temperature.
P3 Setting delayed start
Enter the internal menu in the same way, switch to P3 via the up and down keys, press the setting key again and set the desired delay time (in minutes) via the up and down keys. The delayed start is generally used for compressor cooling, if it is used for refrigerator freezer, this value needs to be set, depending on the size of the compressor back pressure the general setting value is 3-6 minutes, if you are not used to control the compressor or do not need the delay function, directly skip this itemHeating mode setting method
Setting key: start temperature < stop temperature (the program automatically determines the working mode as heating mode)
Setting method:
Press the set button to enter the internal menu and set the start temperature by setting the P0 value and the stop temperature by setting the P1 value.
Example of use:
Controlling the water heater, the heating stops at 50°C, the temperature drops back to 40°C and the heating starts again, how do I set it?
Step 1: Make sure the working mode is heating mode, start temperature < stop temperature
Step 2: Press the set button to enter the internal menu, select P0 and press the set button to set the P0 value to 40°C
Step 3: Press the set button to enter the internal menu, select P1 and press the set button to set P1 to 50°CCooling mode setting method
Setting key:Start temperature>Stop temperature (the program automatically determines the working mode as cooling mode)
Setting method:
Press the Set key to enter the internal menu, set the start temperature by setting P0 and the stop temperature by setting P1.
Use case:
To control a cabinet radiator, stop the radiator at 26°C and start the radiator again when the temperature rises to 30°C. How do I set this?
Step 1: Make sure the working mode is cooling mode, start temperature > stop temperature
Step 2:Press the set key to enter the internal menu, select P0 and press the set key to set the P0 value to 30°C
Step 3: Press the Set button to enter the internal menu, select P1 and press the Set button to set P1 to 26°C.
Tip:
When setting the heating mode, if the set temperature value is reversed accidentally, the output indicator will not light up and the load will not work, if the above situation occurs after setting, you can check if the set temperature value is reversedList
1 x Temperature controller

• Shipping Policy
• Item Location
• Payment Mathord
• Returns Policy
• About response

Shipping Policy1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don\'t receive
the item after 30 days,please keep in touch with us, we\'ll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer\'s responsibility. Please check with your country\'s customs office to determine what these
additional costs will be prior to offerding or buying.Item LocationShenZhenPayment Mathord

1. We accept PAYPAL only.
2. Payment must be made within 7 days of sale closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the NOTES SECTION
when you make payment

Returns Policy

1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive response, and will do the same in return. PLEASE DO NOT leave
negative response without first communication with us. Please allow max 24 HOURS for us to respondAbout response

We maintain high standards of excellence and strive for 100% customer satisfaction! response is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative response, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!