10Pcs EC11 Rotary Encoder Switch Digital Potentiometer 20MM with Switch 5 Pins D
$14.67

Specification Adjustment method: 360-degree Number of pulses: 20 Pin Numbers: 5 Shaft Type: D Type Shaft Diameter: 6mm/0.24\" Shaft Height: 20mm/0.79\" Rated voltage: DC 5V Maximum operating current (resistive load):10mA Max Contact resistance: 100mΩor less(Voltage test at DC 5V 1mA) Bouncing: 10mS or less (Shaft shall be pushed at 1 cycles/s) Insulation resistance: 100MΩ Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank) Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank) Push-life: 30,000 200cycles(0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.