Kit is specifically designed to fit the Ford Flathead V8, It has a 10.5\" long-style and a 11-3/8\" bolt circle, Provides an astonishing 1600 lbs. of clamping force, This is a new item; not remanufactured or refurbished Ford 10.5 Inch Long Style Clutch Pressure Plate Sku # 910260344 Mfr. Part # 910260344 Condition New Brand Speedway Motors Sold Each Details
It\'s getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10.5\" Long-style pressure plates and clutch discs for the flathead V8.
- 10.5\" Long-style
- 11-3/8\" bolt circle
- 1600 lbs of clamping force
- New, not remanufactured
Specs Diameter 10.500" Sold in Quantity Each Centerline of Holes 3.125" Bolt Hole Circle 11.375" Notes Bolt circle is 11-3/8" (same as 10" long style). Doesn't use counterweights. MFG. Part # 910260344 Reviews HEAVY DUTY Rated by Bodyman on March 21, 2025
Summary: Another quality part from Speedway
Yes, I recommend this product.
I would buy again Rated by RP on March 04, 2025
Summary: Good product, seems well made.
Yes, I recommend this product.
Flathead Conversion Kit Information- Not a great application Rated by DRExpectations on September 08, 2022
Summary: This is a great quality pressure plate all around and came with our T5 TKX kit for ford flatheads. What we found after installation of the entire driveline is that this PP is outrageously stiff on the applied pressure needed for clutch disengagement for older traditional Ford mechanical clutch throw-out linkages. Driving all day in a vehicle outfitted with this PP would be a nightmare for anyone with a marginally bad knee. Downright impossible for those with knee damage. In other words, get the knee replacement first if this is your intended PP. As such we had to pull the entire engine and driveline once again to find a suitable replacement. We ended up using the stock 10" 19A-7563-N pressure plate that came with our replacment flathead. The counterweights of PP 19A-7563-N (not this speedway part) will need to be removed in order to not contact the inside reinforcement ring of the speedway T5 bellhousing conversion adapter 91628912. You can also have a machinist remove some material from the 91628912 adapter itself, but may be inadvisable given the overall wall thickness of the tunnel portion of the adapter at ~0.2". If too much material is machined beyond the initial reinforcement ring this could lead to catastrophic failure of the adapter itself. Obligatory Note: Speedway does not advise any modification to it's adapters in this application and will not be held liable in the event of failure. Alternate PP 91628912 would more than likely be inadvisable for higher HP flathead builds, especially supercharged and blueprinted applications. Best of luck on your build.
No, I would not recommend this product.
Speedway parts are made to fit your hotrod project. Rated by Dan the man on August 09, 2022
Summary: I will buy there parts again for my next project.they are a great company to deal with and they will answer all your questions
Yes, I recommend this product.
T5 transmission to flathead V8 Rated by Gary/52 Ford F1 on March 19, 2021
Summary: Bought the T5 conversion adapter with bearings & throwout. Wish I'd seen the PP/ clutch combo, bought each separately. The PP has the counterweights removed, just bolt it up. The install was straight forward, you'll need some new bolts, linkage pins & 49 to 50" driveshaft with the s10 front yoke.
Yes, I recommend this product.
Related Items / Suggested Parts Tremec GM TKX 5-Speed to 1949-53 Ford Flathead Engine Conversion ARP 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit Speedway 1935-48 Ford Flathead V8 Clutch Release Bearings 1935-52 Ford Internal Clutch Release Spring, Bearing Hub Flathead 10 Inch Long-Style Clutch Pressure Plate Tech Support We\'re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 74 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.