1-10x Type-C USB to UART TTL Module 6Pin Serial Converter CP2102 Replace FT232

• Home
• Electronic Component
• Chips
• Sensor
• Arduino Module
• Raspberry Pi

1-10x Type-C USB to UART TTL Module 6Pin Serial Converter CP2102 Replace FT232 Popular Popular

Product Introduction

Driver download />Product features:
1.Easy to use, come with pin head, but not welding, easy to use when you can weld yourself in the direction of personal needs;
2.CP2102 module, upgraded TYPE-C interface to TTL, support for USB to serial port, support for UART STC downloader;
3.CP2102 its high degree of integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART);
4. Supports modem full-featured signals without any external USB devices;
5. CJMCU-CP2102 works similarly to other USB-UART adapter circuits by virtualising the PC\'s USB port into a COM port through the driver for expansion purposes.
Product Description:
CJMCU-Posture Module Communication USB to TTL Module 5V Power Output TTL Level CP2102 Kernel The CJMCU-CP2102 is a highly integrated USB-UART bridge that can provide an easy solution for RS232 to USB conversion using minimal components and PCB space. To put it simply: users can use the CJMCU-CP2102 to convert USB interfaces to RS232 interfaces.Module Description:
1, using 2102 chip, after installing the driver to generate COM port.
2, connected to the standard TYPE-C line input to the computer USB interface, with 3.3V and 5V voltage two power outputs
3, on-board status indicator, transceiver indicator, the correct installation of the driver status indicator will always be on, transceiver indicator will blink when the communication, with running LED indicator.
4、Support the baud rate from 300bps~1Mbps.
5、Communication format support: 1) 5,6,7,8 bit data bits; 2) support for 1,1.5,2 stop bit; 3) odd, even, mark, space, none checksums
6、Support operating system: windows 8.1/7/vista/xp/98, Mac OS-X/OS-9
7, USB seat interface for TYPE-C-USB seat
8, SMD components for the regular company welding, stable quality, beautiful appearance
9, with DTR trigger signal output, can be directly to the pro mini ATMEGA328P and other motherboards to download the programme communication.
10, module size: 16mm * 20mmProduct list:
1/5/10X module
1/5/10X Pin

• Payment must be received in 5 business days of sale closing.
• Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
• Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

• We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you contact us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.

Refund

• All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

• Home
• Electronic Component
• Chips
• Sensor
• Arduino Module
• Raspberry Pi

1-10x Type-C USB to UART TTL Module 6Pin Serial Converter CP2102 Replace FT232

Product Introduction

Driver download />Product features:
1.Easy to use, come with pin head, but not welding, easy to use when you can weld yourself in the direction of personal needs;
2.CP2102 module, upgraded TYPE-C interface to TTL, support for USB to serial port, support for UART STC downloader;
3.CP2102 its high degree of integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART);
4. Supports modem full-featured signals without any external USB devices;
5. CJMCU-CP2102 works similarly to other USB-UART adapter circuits by virtualising the PC\'s USB port into a COM port through the driver for expansion purposes.
Product Description:
CJMCU-Posture Module Communication USB to TTL Module 5V Power Output TTL Level CP2102 Kernel The CJMCU-CP2102 is a highly integrated USB-UART bridge that can provide an easy solution for RS232 to USB conversion using minimal components and PCB space. To put it simply: users can use the CJMCU-CP2102 to convert USB interfaces to RS232 interfaces.Module Description:
1, using 2102 chip, after installing the driver to generate COM port.
2, connected to the standard TYPE-C line input to the computer USB interface, with 3.3V and 5V voltage two power outputs
3, on-board status indicator, transceiver indicator, the correct installation of the driver status indicator will always be on, transceiver indicator will blink when the communication, with running LED indicator.
4、Support the baud rate from 300bps~1Mbps.
5、Communication format support: 1) 5,6,7,8 bit data bits; 2) support for 1,1.5,2 stop bit; 3) odd, even, mark, space, none checksums
6、Support operating system: windows 8.1/7/vista/xp/98, Mac OS-X/OS-9
7, USB seat interface for TYPE-C-USB seat
8, SMD components for the regular company welding, stable quality, beautiful appearance
9, with DTR trigger signal output, can be directly to the pro mini ATMEGA328P and other motherboards to download the programme communication.
10, module size: 16mm * 20mmProduct list:
1/5/10X module
1/5/10X Pin

• Payment must be received in 5 business days of sale closing.
• Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
• Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

• We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you contact us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.

Refund

• All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.