TECHTONGDA0.1-220LBS Auto Weighing Type Quantitative Liquid Filling Machine High Flow 110V Product OverviewThe automatic weighing liquid filling machine is specially designed for automatically weighing and quantitatively filling various kinds of liquid materials, such as honey, paste, edible oil and sauce. The stainless steel machine body comes with a separate weighing platform. The machine supports weighing filling, pricing filling and timing filling, and can also support conveyor belt filling and multi-stage interconnection to achieve modern assembly line filling operation. Product Parameters Voltage 110V/60Hz Single-phase Power 600W Filling Range 50g-100kg (0.1lb-220.4lb) Weighing Capacity 100kg (220.4lb) Weighing Division Value 10g (0.02lb) Pump Type Diaphragm pump Pump Flow Rate 72L/min (19 US gal/min) Overall Error≤10g (≤0.02lb) Filling Nozzle Size 20mm (0.7in) filling nozzle Filling Height Adjustable, 0-70cm (0-27.5in) Hose Material PVC steel wire hose Hose SpecificationInner Diameter: 32mm (1.2in)
Outer Diameter: 38mm (1.5in) Inlet Hose Length 2m (6.5ft) Outlet Hose Length 1m (3.2ft) Packing dimension 50*46*47cm (19.69*18.11*18.50 inches) Net weight / Gross weight 20.2kg (44.5lb) / 22.4kg (49.3lb)
Precaution1. Verify the voltage before connection. Reliable PE earth grounding is mandatory to avoid electric shock.
2. The diaphragm pump is suitable for low & medium viscosity liquids. Do NOT fill highly corrosive fluids, strong solvents, high-viscosity pastes or materials with large hard particles, which may damage the pump and pipelines.
3. Do not strike or overload the weighing platform. Never drag containers on the platform.
4. The diaphragm pump must NOT idle without water for extended periods. Drain residual liquid inside the pump before shutdown.
5. Clean the pump, pipelines and filling nozzle after every use to prevent blockage caused by dried liquid. Always cut off power before cleaning.
6. Keep hands away from below the filling nozzle while the machine is running.
7. Do not place materials exceeding the rated load to protect the weighing sensor.
Product Features1. High Filling Flow Rate: The machine has a high filling speed of 72L/min, and is ideal for large pails and containers to greatly improve the filling efficiency.
2. Multiple Filling Modes: The machine supports weighing/pricing/timing filling and ensures stable filling accuracy.
3. Strong Expandability: The machine can be connected to a conveyor belt for single-nozzle conveyor filling. Multiple main units support multi-stage interconnection to build multi-nozzle filling lines.
4. Wide Filling Range: The machine is compatible with containers from small bottles to large drums within the filling range of 50g-100kg.
5. Speed & Height Adjustability: The filling speed and height can be easily adjusted to adapt to various materials and containers.
6. Stainless Steel Construction: The stainless steel body is resistant to corrosion, easy to clean and long in service life.
7. Easy Operation: The digital control panel with formula storage and auto tare function, and operators can easily master the machine.
8. Safety Protection: The machine supports overload protection and overheating protection to achieve stable and safe operation.
Control Panel
The machine is equipped with an LCD digital control panel and numeric keypad for intuitive and simple operation. It supports formula storage and auto tare functions for convenient parameter setup. An independent flow knob allows flexible adjustment of the pump flow rate.
Filling Nozzle
The stainless steel filling nozzle is resistant to corrosion and compatible with various liquids. The bracket supports flexible height adjustment of the filling nozzle to match containers of different heights. The filling nozzle enables easy hose assembly, reliable sealing and smooth filling.
Diaphragm Pump
The diaphragm pump features strong self-priming capacity for stable liquid feeding. It can handle low & medium viscosity liquids and provides excellent leak-proof performance. The inlet connector ensures smooth liquid intake and quick hose assembly and disassembly.
Weighing Platform
The sturdy weighing platform is resistant to corrosion and easy to clean. The high-precision weighing sensor delivers real-time weight signals with fast response. As a separate platform, it isolates vibration from the pump to achieve higher filling precision.
Operation Method
1. Connect the main unit with the weighing platform and foot switch. Connect the machine to the 110V power supply, and turn on the power switch.
2. Use the control panel to conduct filling operation.
(1) How to modify the \"Set\":
Press [SET], enter the value, and press [SET]. (For example: 500g, press [SET]-[5]-[0]-[0]-[SET])
(2) How to use \"Manual mode\":
Place a bottle, and press [Start] to start filling. The filling automatically stops when the weight reaches the set limit.
(3) How to use \"Automatic mode\": (Press [Automatic] to enter automatic mode)
Press [Auto], then place a bottle on the platform, release the hand and automatically start the filling. The system will automatically peel, automatically start, automatically stop after reaching the set amount, and automatically return to zero after the full bottle is taken down. Note: If it does not start after placing the bottle, remove the bottle at this time, click [CLEAR], and then put the bottle on the platform.
3. Turn the speed knob to adjust the filling speed as needed.
4. After filling, discharge the residue liquid in the machine. Turn off the power switch, disconnect the power supply and clean the machine thoroughly.
Product DisplayItem Included (056150): 1 x Automatic Weighing and Quantitative Liquid Filling Machine
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Warranty & response▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.On Oct 20, 2026 at 22:40:08 PDT, seller added the following information:
On Oct 21, 2026 at 19:34:51 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.